
我这边控制器是2504 版本是7.6.120.0 原来有5个cap2602E-C-K9,用着没问题。最近新增加了一个cap2602i-C-K9,不能上线。新AP能获取到IP地址,授权也够,
下边是AP的启动信息,哪位大神看看什么问题
ap: vesion
C2600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(25e)JA1, RELEASE SOFTWARE (fc1)
Technical Support: [img]file:///C:\Users\YX\AppData\Local\Temp\[5UQ[BL(6~BS2JV6W}N6[%S.png[/img]http://www.cisco.com/techsupport
Compiled Wed 30-May-12 03:34 by binugopa
ap: reset
Are you sure you want to reset the system (y/n)?y
System resetting...
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP: Numonyx Mirrorbit (0089)
Xmodem file system is available.
flashfs[0]: 44 files, 10 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 15585792
flashfs[0]: Bytes available: 16412160
flashfs[0]: flashfs fsck took 16 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 00:3a:9a:a9:85:e4
Ethernet speed is 100 Mb - FULL Duplex
Unable to get our ip address: no "IP_ADDR" variable set
The system has encountered an error initializing the
TFTP file system. The system is ignoring the error and
continuing to boot. If you abort the boot process,
the following commands will set IP_ADDR, DEFAULT_ROUTER
and NETMASK environment variables, initialize the tftp
system, and load the operating system software:
set IP_ADDR
set DEFAULT_ROUTER
set NETMASK
tftp_init
boot
Loading "flash:/update/ap3g2-k9w8-mx.152-4.JB5/ap3g2-k9w8-xx.152-4.JB5"...uncompress: Unknown mzip segment type: 2
Error loading "flash:/update/ap3g2-k9w8-mx.152-4.JB5/ap3g2-k9w8-xx.152-4.JB5"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
C2600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(25e)JA1, RELEASE SOFTWARE (fc1)
Technical Support: [img]file:///C:\Users\YX\AppData\Local\Temp\[5UQ[BL(6~BS2JV6W}N6[%S.png[/img]http://www.cisco.com/techsupport
Compiled Wed 30-May-12 03:34 by binugopa
|
|